好疼太大了太粗太长了视频

  • <acronym id="x1f5r"><label id="x1f5r"></label></acronym>
    <bdo id="x1f5r"></bdo>
    1. <track id="x1f5r"></track>
      <td id="x1f5r"><strike id="x1f5r"></strike></td>

      PRODUCTS

      Wolwa GNQY-C8 8 tons Automobile crane

      Automobile crane is a kind of crane fitted on a common car chassis or special automobile chassis, its driving cab and lifting control cab is setted separately. This kind of crane is featured by good maneuverability and quick swing speed. It must be outrigger supported when working, and can't load, also not suitable for work in soft or muddy ground.

      Please call:
      +86-537-6588123

      Wolwa GNQY-C8 8 tons Automobile crane introduction

      Automobile crane is a kind of crane fitted on a common car chassis or special automobile chassis, its driving cab and lifting control cab is setted separately. This kind of crane is featured by good maneuverability and quick swing speed. It must be outrigger supported when working, and can't load, also not suitable for work in soft or muddy ground.

      Wolwa GNQY-C8 8 tons Automobile crane parameter

      Main parameter

      model

      GBQY-C8

      Lift speed

      53(76)m/min

      Max.lifting weight

      8000Kg

      Swing speed

      3.2/min

      Max.lifting height

      34m

      Travel speed

      75Km/h

      Engine model

      4D26

      Outrigger base

      3.4*4.0m

      power

      70Kw

      Dimention

      8.75*2.23*2.8m

      Chassis model

      BJ5073JQZ-1

       

       

      Wolwa GNQY - C8 8 tons Automobile crane operation specification

      1. The crane driver must be professional and technical trained, examination qualified and getting the certificate can operate independently.

       The driver should be familiar with mechanical principle of mobile crane, maintenance rules, safety operation procedures, and strictly carry out according to regulations. It is forbidden to drink or body have not indications for operation.

      1. Before use people should check whether the job site is flat solid in detail, leg whether firm, operating handle, brake and other operating device is sensitive and reliable, to ensure working without anything abnormal.

       (4) When hook lifting, the components must be the in the direction of the rear of the lifting. Lifting must first do a try hanging, to avoid excessive lifting, minimize the objects stay in the air, suspended substance to slow even when landing.
      (5) When working, the abrasion of wire rope should be often observed. When the crane boom angle is large, the hanging material should first be down to the position, in keeping the sling tension condition, then lower hoist boom, loose rope, and pick the hook.

      1. Hoist boom lift must fall back when: do not lower down the arm when lifting heavy objects. The throttle is smaller when lowing the arm and bigger when lifting. Rotary motion is to be steady, not sudden reversal, when close to the rated weight load, shall not air rotary when  the ground clearance is 0.5 m above .
      1. It is strictly prohibited to lifting when driving, the lift arm must be put on the bracket when driving, the hook is in the bumper, and the wire rope to pull tight.

      (8) After the completion of the work, lifting legs and sawing arm shall not simultaneously. Driving on the highway, it is imperative to strictly abide by the traffic rules, turning slowly, and strictly control the speed of the car on the way down.

      Wolwa GNQY-C8 8 tons Automobile crane picture

       Wolwa GNQY-C8 8 tons Automobile crane

      Leave a message

      ×
      小型挖掘機小挖掘機微型挖掘機履帶運輸車 小挖機
      Copyright Right ? 2014 www.wolwa.cn Powered By Shandong Wolwa Industrial Limited Company 魯ICP備10206551號-6
      好疼太大了太粗太长了视频
    2. <acronym id="x1f5r"><label id="x1f5r"></label></acronym>
      <bdo id="x1f5r"></bdo>
      1. <track id="x1f5r"></track>
        <td id="x1f5r"><strike id="x1f5r"></strike></td>